A.V. Okulov, S.-H. Joo, H.S. Kim, H. Kato, I.V. Okulov, Nanoporous high-entropy alloy by liquid metal dealloying, Metals (Impact factor: 2.117) 10(10), 2020, 1396.

I.V. Okulov, S.-H. Joo, A.V. Okulov, A.S. Volegov, B. Luthringer, R. W.-Romer, L. Zhang, L. Madler, J. Eckert, H. Kato, Surface functionalization of biomedical Ti-6Al-7Nb alloy by liquid metal dealloying, Nanomaterials (Impact factor: 4.034) 10(8), 2020, 1479.

J. Jiang, W.-S. Ko, S.-H. Joo, D.X. Wei, T. Wada, H. Kato* and D.V. Louzguine-Luzgin*, Experimental and molecular dynamics studies of phase transformations during cryogenic thermal cycling in complex TiNi-based crystalline/amorphous alloys, Journal of Alloys and Compounds (Impact factor: 4.175) 854, 2020, 155379.

S.-H. Joo* and H. Kato, Effect of dealloying rate on transformation behavior during liquid metal dealloying, Journal of Alloys and Compounds (Impact factor: 4.175) 831, 2020, 154733.

W.-Y. Park, T. Wada, S.-H. Joo, J. Han and H. Kato*, Novel hierarchical nanoporous graphene nanoplatelets with excellent rate capabilities produced via self-templating liquid metal dealloying, Materials Today Communications (Impact factor: 1.859) 24, 2020, 101120.

S.-H. Joo*, J.W. Bae, Y. Shimada, T. Wada, H.S. Kim, A. Takeuchi, T. J. Konno, H. Kato* and I.V. Okulov, Beating thermal coarsening in nanoporous materials via high-entropy design, Advanced Materials (Impact factor: 25.809) 32(6), 2020, 1906160.

S.-H. Joo* and H. Kato, Transformation mechanisms and governing orientation relationships through selective dissolution in liquid metal dealloying, Materials & Design (Impact factor: 5.770) 185, 2020, 108271.

S.-H. Joo*, K. Yubuta and H. Kato, Ordering kinetics of nanoporous FeCo during liquid metal dealloying and the development of nanofacets, Scripta Materialia (Impact factor: 4.539) 177, 2020, 38-43.

S.-H. Joo* and H. Kato, Development of porous FeCo by liquid metal dealloying: evolution of porous morphology and effect of interaction between ligaments and melt, Materials & Design (Impact factor: 5.770) 180, 2019, 107908.

I.V. Okulov*, P.-A. Geslin, I.V. Soldatov, H. Ovri, S.-H. Joo, H. Kato, Anomalously Low Modulus of the Interpenetrating-Phase Composite of Fe and Mg obtained by Liquid Metal Dealloying, Scripta Materialia (Impact factor: 4.539) 163, 2019, 133-136.

J. Guo, X. Zhang, D. Kong, S.-H. Joo, W. Kim, H. S. Kim*, and X. Zhang*, Microstructure, micro-hardness, and corrosion resistance of commercial purity Al processed by hollow-cone high-pressure torsion, Advanced Engineering Materials (Impact factor: 2.906) 21(3), 2019, 1800905.

J. Guo, S.-H. Joo, D. Pi, W. Kim, Y. Song, H. S. Kim*, X. Zhang* and D. Kong, Effect of high-pressure torsion on the thermal and mechanical properties of La62Cu12Ni12Al14 bulk metallic glass, Advanced Engineering Materials (Impact factor: 2.906) 21(3), 2019, 1800918.

K.P. So, A. Kushima, J.G. Park, X. Liu, D.H. Keum, H.Y. Jeong, F. Yao, S.-H. Joo, H.S. Kim, H. Kim, J. Li* and Y.H. Lee*, Intragranular dispersion of carbon nanotubes comprehensively improves aluminum alloys, Advanced Science (Impact factor: 15.804) 58(6), 2018, 1800115.

J. Moon, Y. Qi, E. Tabachnikova, Y. Estrin, W.-M. Choi, S.-H. Joo, B.-J. Lee, A. Podolskiy, M. Tikhonovsky and H.S. Kim*, Microstructure and mechanical properties of high-entropy alloy Co20Cr26Fe20Mn20Ni14 processed by high-pressure torsion at 77 K and 300 K, Scientific Reports (Impact factor: 4.525) 8(1), 2018, 11074.

J. Moon, H.J. Jeong, S.-H, Joo, S.S. Sohn, K.-S. Kim, S. Lee and H.S. Kim*, Simulation of pipe-manufacturing processes using sheet bending-flattening, Experimental Mechanics (Impact factor: 2.256) 48(6), 2018, 909-918.

J.W. Bae, J. Moon, M.J. Jang, D.-H. Ahn, S.-H. Joo, J. Jung, D. Yim and H.S. Kim*, Deep drawing behavior of CoCrFeMnNi high-entropy alloys, Metallurgical and Materials Transactions A (Impact factor: 2.224) 46(9), 2017, 4111-4120.

J. Guo, S.-H. Joo, D.-H. Pi, X. Zhang, X. Zhang, M. Abdelaal, Y. Song and H.S. Kim*, Wear resistance of the La62Cu12Ni12Al14 bulk metallic glass under dry friction conditions, Tribology Letters (Impact factor: 2.235) 65:62, 2017.

J. Moon, Y. Qi, E. Tabachnikova, Y. Estrin, W.-M. Choi, S.-H. Joo, B.-J. Lee, A. Podolskiy, M. Tikhonovsky and H.S. Kim*, Deformation-induced phase transformation of Co20Cr26Fe20Mn20Ni14 high-entropy alloy during high-pressure torsion at 77 K, Materials Letters (Impact factor: 3.019) 202, 2017, 86-88.

S.-H. Joo, M.J. Jang, C.-W. Tsai, J.-W. Yeh and H.S. Kim*, Tensile deformation behavior and deformation twinning of an equimolar CoCrFeMnNi high-entropy alloy, Materials Science and Engineering A (Impact factor: 4.081) 689, 2017, 122-133.

S.-H. Joo, H. Kato, M.J. Jang, J. Moon, E.B. Kim, S.-J. Hong and H.S. Kim*, Structure and properties of ultrafine-grained CoCrFeMnNi high-entropy alloys produced by mechanical alloying and spark plasma sintering, Journal of Alloys and Compounds (Impact factor: 4.175) 698, 2017, 591-604.

M.J. Jang, S.-H. Joo, C.-W. Tsai, J.-W. Yeh and H.S. Kim*, Compressive deformation behavior of CrMnFeCoNi high-entropy alloy, Metals and Materials International (Impact factor: 1.647) 22(6), 2016, 982-986.

J.I. Yoon, J. Jung, S.-H. Joo, T.J. Song, K.-G. Chin, M.H. Seo, S.-J. Kim, S. Lee and H.S. Kim*, Correlation between fracture toughness and stretch-flangeability of advanced high strength steels, Materials Letters (Impact factor: 3.019) 180, 2016, 322-326.

S.-H. Joo and H.S. Kim*, Ring-constraint high pressure torsion process, Metallurgical and Materials Transactions A (Impact factor: 2.224) 47(7), 2016, 3473-3478.

S.-H. Joo, D.-H. Pi, J. Guo, H. Kato, S. Lee and H.S. Kim*, Enhanced wear resistivity of a Zr-based bulk metallic glass processed by high-pressure torsion under reciprocating dry conditions, Metals and Materials International (Impact factor: 1.647) 22(3), 2016, 383-390.

S.-H. Joo, D.-H. Pi, A.D. Setyawan, H. Kato, M. Janecek, Y.C. Kim, S. Lee and H.S. Kim*, Work-hardening induced tensile ductility of bulk metallic glasses via high-pressure torsion, Scientific Reports (Impact factor: 4.525) 5: 9660, 2015, 1-9.

H. Asgharzadeh*, S.-H. Joo, Jin-Kyu Lee and H.S. Kim, Consolidation of Cu-based amorphous alloy powders by high-pressure torsion, Journal of Materials Science (Impact factor: 3.442) 50(8), 2015, 3164-3174.

H. Asgharzadeh*, S.-H. Joo and H.S. Kim*, Al/C60 nanocomposites fabricated by high-pressure torsion, Metallurgical and Materials Transactions A (Impact factor: 2.224) 46(5), 2015, 1838-1842.

C. Jeon, H. Lee, C.P. Kim, S.-H. Joo, H.S. Kim and S. Lee*, Effects of effective dendrite size on tensile deformation behavior in Ti-based dendrite-containing amorphous matrix composites modified from Ti-6Al-4V alloy, Metallurgical and Materials Transactions A (Impact factor: 2.224) 46(1), 2015, 235-250.

H.S. Kim*, S.-H. Joo, H.-J. Jung, Plastic Deformation and computer simulations of equal channel angular pressing, Journal of Korean Institute of Metals and Materials (Impact factor: 0.992) 52(2), 2014, 163-171.

E.-H. Kong, S.-H. Joo, H.-J. Park, S. Song, Y.-J. Chang, H.S. Kim and H.M. Jang*, Band gap tuning with thermal residual stresses induced in a quantum-dot, Small (Impact factor: 10.856) 10(18), 2014, 3678-3684.

H. Asgharzadeh, S.-H. Joo and H.S. Kim*, Consolidation of carbon nanotube reinforced aluminum composites by high pressure torsion, Metallurgical and Materials Transactions A (Impact factor: 2.224) 45(9), 2014, 4129-4137.

S.-H. Joo, J. Jung, M.S. Chun, C.H. Moon, S. Lee and H.S. Kim*, Finite element and experimental analysis of closure and contact bonding of pores during hot rolling of steel, Metallurgical and Materials Transactions A (Impact factor: 2.224) 45(9), 2014, 4002-4011.

C. Jeon, C.P. Kim, S.-H. Joo, H.S. Kim and S. Lee*, High tensile ductility of Ti-based amorphous matrix composites modified from conventional Ti-6Al-4V titanium alloy, Acta Materialia (Impact factor: 7.293) 61, 2013, 3012-3026.

S.-H. Joo, J.K. Lee, J.-M. Koo, S. Lee, D.-W. Suh and H.S. Kim*, Method for measuring nanoscale local strain in a dual phase steel using digital image correlation with nanodot patterns, Scripta Materialia (Impact factor: 4.539) 68, 2013, 245-248.

S.-H. Joo, H. Kato, K. Gangwar, S. Lee and H.S. Kim*, Shear banding behavior and fracture mechanisms of Zr55Al10Ni5Cu30 bulk metallic glass in uniaxial compression analyzed using a digital image correlation method, Intermetallics (Impact factor: 3.353) 32, 2013, 21-29.

S.-H. Joo, S.C. Yoon, H.-G. Jeong, S. Lee and H.S. Kim*, Deformation behavior of consecutive workpieces in equal channel angular pressing of solid dies, Journal of Materials Science (Impact factor: 3.442) 47, 2012, 7877-7882.

G. Faraji, M.M. Mashhadi, S.-H. Joo and H.S. Kim*, The role of friction in tubular channel angular pressing, Reviews on Advanced Materials Science (Impact factor: 1.828) 31, 2012, 12-18.

M. Tavoosi, F. Karimzadeh, M.H. Enayati, S.-H. Joo and H.S. Kim*, Amorphous phase formation in Al80Fe10M10 (M = Ni, Ti, and V) ternary systems by mechanical alloying, Journal of Materials Science (Impact factor: 3.442) 46, 2011, 7633-7638.

M. Vaseghi, A.K. Taheri, J.H. Yoo, S.-H. Joo and H.S. Kim*, Adiabatic shear banding in an Al-Mg-Si alloy processed by equal channel angular pressing, Materials Science Forum (Impact factor: 0.35) 654-656, 2010, 1014-1017.

S.-H. Joo and H.S. Kim*, Comparison of deformation and microstructural evolution between equal channel angular pressing and forward extrusion using the dislocation cell mechanism-based finite element method, Journal of Materials Science (Impact factor: 3.442) 45, 2010, 4705-4710.

S.-H. Joo, S.C. Yoon, C.S. Lee, D.H. Nam, S.H. Hong and H.S. Kim*, Microstructure and tensile behavior of Al and Al-matrix carbon nanotube composites processed by high pressure torsion of the powders, Journal of Materials Science (Impact factor: 3.442) 45, 2010, 4652-4658.